lexus emblem on the chrome altezza grill - my.IS

akk01is300 · 06-19-2005, 09:43 PM

i want the lexus emblem on the altezza grill i have, whats the best way to do it. and where do i get it. thanks

IMPRIMIS · 06-19-2005, 09:45 PM

Quote:

Originally Posted by akk01is300

i want the lexus emblem on the altezza grill i have, whats the best way to do it. and where do i get it. thanks

There is a DIY on the site if you looked, it is a process ...just zip ties

akk01is300 · 06-19-2005, 09:47 PM

ok thanks

IMPRIMIS · 06-19-2005, 10:01 PM

Chris Carlos did the DIY I believe also

azzurro · 06-19-2005, 10:18 PM

How To: Get "L" emblem on Z-Edition grill *Pics*

Unfortunately the pics are gone...

jonnyblazed · 06-20-2005, 04:09 AM

i just did it a couple weeks ago and was planning to take pics since his weren't up but didn't get my camera back in time, but you don't really need pics.
as long as you have the L emblem with the 4 black plastic clips on the back your good. all you need is a lil' drill to put holes on each end of the clips and 2 long zipties [pref black] so that they can go thru the holes, around through the grill, and back again to zip it up. make sure you center the badge too cos once it's on, it's on pretty tight! it takes only like 5 minutes to do and looks mad clean!

brocky · 06-20-2005, 04:58 AM

Yea i did it similarly to jonnyblazed. First i broke off the two lil pieces sticking out in the middle of the emblem. Then i drilled a small hole in each of the ends of the clip. Instead of using zip ties, i bought really thin wires from Home Depot and i tied em up. It was pretty tedious for me. The wires are thin, but pretty hard to tie once you try to keep them nice and tight on the grill. But after you finish tying it up... its worth a good look and a smile on your face.

akk01is300 · 06-20-2005, 10:21 AM

ill try it today

IMPRIMIS · 06-20-2005, 11:55 AM

Quote:

Originally Posted by brocky

Yea i did it similarly to jonnyblazed. First i broke off the two lil pieces sticking out in the middle of the emblem. Then i drilled a small hole in each of the ends of the clip. Instead of using zip ties, i bought really thin wires from Home Depot and i tied em up. It was pretty tedious for me. The wires are thin, but pretty hard to tie once you try to keep them nice and tight on the grill. But after you finish tying it up... its worth a good look and a smile on your face.

Same thing I suggested...