like what the title says...I am almost at the end of my parts list that I need...I called in a few times and gave this list cnt remember who I spoke to and never got an answer back so this is my last resort into getting an answer and giving my business to you folks...
1. Turbocharger of choice
-Ideal Choices: T4/T61; T4/T04E-60; T4/T04E-57, GT35R/T4, GT4088R
-3” V-band turbine outlet highly preferred
2. Turbo Specific Hardware
-Turbo Oil Drain Flange (GT or T04, depending on turbo)
-˝” NPT to 5/8” barb fitting (or -10AN male)
-Oil Feed fitting (varies by turbo brand/model)
-3” V-band Assembly (clamp and mating flange)
3. Turbo Related Oiling hardware
- -4AN SS braided line (minimum 4ft length with -4AN ends)
-Oil drain line (5/8” silicon hose slip barb) and hose clamps
(optional: -10AN or -8AN SS braided line and matching hose ends)
4. Block Fitting for Turbo Oil Drain (one of the following, depending on option)
-˝” to 5/8” slip barb fitting (if you are using silicon hose)
(optional) ˝” NPT to -10AN (bigger line, if manifold/turbo allows)
(optional) 3/8” NPT to -8 AN (smaller, if manifold/turbo has limited space)
5. Block Fitting for Turbo Oil Feed
-Brass or Steel 1/8” BSPT Street Tee
-Port Layout = Male (Left) – Female (Top) – Female (Right)
6. Turbo Related Water Line hardware (for water-cooled cartridges only)
-Metric to -6AN coolant fittings x 2 (depending on turbo brand/model)
-Hoses and -6AN hose-ends for coolant connections for turbo of choice
7. Turbo Related gaskets
-Turbine inlet gasket (between manifold and turbo)
-Manifold gasket (between cyl. head and manifold – MLS steel preferred)
-T04 Turbo Oil Drain Flange Gasket
-Depending on turbo chosen, if water-cooled, it needs the appropriate gaskets and crush washers
8. Turbo Nuts and Bolts (if they come included, or can be purchased as a package)
I need the most cost effective package you guys can put together for me with the parts I listed above...
» Wheel & Tire Center
